本文共 5459 字，大约阅读时间需要 18 分钟。

总是忘记阿，标记一下

sudo lspci -v

lshw -C network

modprobe mac80211

1, 主板信息 .查看主板的序列号 -------------------------------------------------- #使用 [url=javascript:;]命令[/url] dmidecode | grep -i 'serial number' #查看板卡信息 cat /proc/pci -------------------------------------------------- 2, cpu信息 -------------------------------------------------- #通过/proc文件 [url=javascript:;]系统[/url] 1) cat /proc/cpuinfo #通过查看开机信息 2) dmesg | grep -i 'cpu' # 3)dmidecode -t processor -------------------------------------------------- 3, 硬盘信息 -------------------------------------------------- #查看分区情况 fdisk -l #查看大小情况 df -h #查看使用情况 du -h # hdparm -I /dev/sda # dmesg | grep sda -------------------------------------------------- 4, 内存信息 -------------------------------------------------- 1) cat /proc/meminfo 2) dmesg | grep mem 3) free -m 4) vmstat 5) dmidecode | grep -i mem -------------------------------------------------- 5, 网卡信息 -------------------------------------------------- 1) dmesg | grep -i 'eth' 2) cat /etc/sysconfig/hwconf | grep -i eth 3) lspci | grep -i 'eth' -------------------------------------------------- 6, 鼠标键盘和USB信息 查看键盘和鼠标：cat /proc/bus/input/devices 查看USB设备：cat /proc/bus/usb/devices 查看各 [url=javascript:;]设备[/url] 的中断请求(IRQ):cat /proc/interrupts 7, 显卡信息 -------------------------------------------------- 1)lspci |grep -i 'VGA' 2)dmesg | grep -i 'VGA' -------------------------------------------------- 8, 声卡信息 -------------------------------------------------- 1)lspci |grep -i 'VGA' 2)dmesg | grep -i 'VGA' -------------------------------------------------- 7, 其他命令 .用硬件检测程序kuduz探测新硬件：service kudzu start ( or restart) .dmesg (查看所有启动时检测到的硬件信息) .lspci (显示外设信息, 如usb，网卡等信息) .cat /etc/sysconfig/hwconf .mpstat 8, 需要手动安装的 [url=javascript:;]工具[/url] lshw,hwinfo,hal-device-manager 9, Solaris如何检测硬件参数 俺从别处发现了些有意思的东西： Solaris的硬件相关命令 发表：2004-3-8 11:20:36 出处：你的博客网(yourblog.org) -------------------------------------------------------------------------------- 1)．查看当前处理器的类型和速度(主频) # psrinfo –v Status of processor 1 as of: 11/24/01 10:34:41 Processor has been on-line since 11/24/01 10:18:20. The sparcv9 processor operates at 432 MHz, and has a sparcv9 floating point processor. Status of processor 3 as of: 11/24/01 10:34:41 Processor has been on-line since 11/24/01 10:18:22. The sparcv9 processor operates at 432 MHz, and has a sparcv9 floating point processor. 2)．打印当前的OBP版本号 # prtconf –V OBP 3.20.0 2000/10/24 10:47 # /usr/platform/sun4u/sbin/prtdiag –v | grep OBP OBP 3.20.0 2000/10/24 10:47 POST 6.1.0 2000/10/24 10:49 ok. .version Release 3.20 Version 0 created 2000/10/24 10:47 OBP 3.20.0 2000/10/24 10:47 POST 6.1.0 2000/10/24 10:49 OBDIAG 4.5.1 2000/10/24 10:48 3)．查看硬盘物理信息(vendor, RPM, Capacity) # iostat –E sd0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 Vendor: SEAGATE Product: ST34371W SUN4.2G Revision: 7462 Serial No: JDX394220KW EBC Size: 4.29GB ; Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 Illegal Request: 0 Predictive Failure Analysis: 0 sd2 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 Vendor: FUJITSU Product: MAJ3364M SUN36G Revision: 0804 Serial No: 01M18144 Size: 36.42GB ; Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 Illegal Request: 0 Predictive Failure Analysis: 0 sd3 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 Vendor: FUJITSU Product: MAJ3364M SUN36G Revision: 0804 Serial No: 01M16199 Size: 36.42GB ; Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 Illegal Request: 0 Predictive Failure Analysis: 0 sd21 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 Vendor: TOSHIBA Product: DVD-ROM SD-M1401 Revision: 1007 Serial No: 06/22/00 Size: 18446744073.71GB ; Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 Illegal Request: 0 Predictive Failure Analysis: 0 4)．查看磁盘的几何参数和分区信息 # prtvtoc /dev/rdsk/c0t0d0s0 * /dev/rdsk/c0t0d0s0 partition map * * Dimensions: * 512 bytes/sector * 135 sectors/track * 16 tracks/cylinder * 2160 sectors/cylinder * 3882 cylinders * 3880 accessible cylinders * * Flags: * 1: unmountable * 10: read-only * * Unallocated space: * First Sector Last * Sector Count Sector * 8277120 103680 8380799 * * First Sector Last * Partition Tag Flags Sector Count Sector Mount Directory 0 2 00 0 2049840 2049839 / 1 3 01 2049840 615600 2665439 2 5 00 0 8380800 8380799 5 0 00 2665440 2458080 5123519 /opt 6 4 00 5123520 3073680 8197199 /usr 7 8 00 8197200 79920 8277119 /export/home 5)．显示已经使用和未使用的i-node数目 # df –F ufs –o i Filesystem iused ifree %iused Mounted on /dev/dsk/c0t0d0s0 7859 479821 2% / /dev/dsk/c0t0d0s6 37763 339517 10% /usr /dev/dsk/c0t0d0s5 722 301102 0% /opt /dev/dsk/c0t0d0s7 4 24380 0% /export/home 6).显示cpu使用率最高的进程 # ps –eo pid,pcpu,args | sort +1n 该命令输出当前系统进程的pid, CPU占用率及命令描述，并以pcpu来排序 7)．显示内存占用率最高的进程 # ps –eo pid,vsz,args | sort +1n 该命令输出当前系统进程的pid，内存占用率及命令描述，并以vsz来排序 8)．查看及启动系统的32位或64位 [url=javascript:;]内核[/url] 模式 64位模式 # isalist –v sparcv9+vis sparcv9 sparcv8plus+vis sparcv8plus sparcv8 sparcv8-fsmuld sparcv7 sparc # isainfo –v 64-bit sparcv9 applications 32-bit sparc applications # isainfo –b 64 启动64位内核模式 ok. boot kernel/sparcv9/unix 32位模式 # isalist –v sparcv8plus+vis sparcv8plus sparcv8 sparcv8-fsmuld sparcv7 sparc # isainfo –v 32-bit sparc applications # isainfo –b 32 启动32位模式 ok. boot kernel/unix 9)．查看当前的OpenWindows版本 # showrev –w OpenWindows version: X11 Version 6.4.1 5 November 2001 10)．查看当前CDE的版本 # /usr/ccs/bin/what /usr/dt/bin/dtmail /usr/dt/bin/dtmail: CDE Version 1.4.6_06 CDEVersion1.4.6_06

转载地址：https://blog.csdn.net/horace_lee/article/details/83914027 如侵犯您的版权，请留言回复原文章的地址，我们会给您删除此文章，给您带来不便请您谅解！